Product Description

PWM FAN CONTROLER  

This module will tie into the GM CANBUS data lines and will monitor Coolant temp and Engine RPM data. It will use this data to control a PWM style fan.

We curently offer several types of PWM controlers

PWM-CAN. This unit is configured for automatic variable fan speed operation. This unit will read the engine coolant temp data from the vehicle CAN BUS.  It will use this information to determine what speed to run the fan. The fan will run at a low idle speed when the module is powered on and the engine is running, as the engine temps increase the fans will be commanded to run at a higher percentage from 10-100%. 

PWM-CAN-POS. This unit is configured for automatic variable fan speed operation. This unit is also equiped with 1 "POSITIVE" side input. By applying voltage to input 1 will cause the fan to run at a HIGH speed. 

PWM-CAN-LOW. This unit is configured for automatic variable fan speed operation. This unit is also equiped with 1 NEGATIVE" side input. Grounding input 2  will cause the fan to run at a HIGH speed. 

PWM-CAN-POS-POS. This unit is configured for automatic variable fan speed operation. This unit is also equiped with 2 "POSITIVE" side inputs. By applying voltage to input 1 will cause the fan to run at a MEDIUM speed. By applying voltage to input 2 will run the fan at HIGH speed.

PWM-CAN-LOW-LOW. This unit is configured for automatic variable fan speed operation. This unit is also equiped with 2 NEGATIVE" side inputs. Grounding input 1 will cause the fan to run at a MEDIUM speed. Grounding input 2 will run the fan at HIGH speed.

PWM-CAN-POS-NEG. This unit is configured for automatic variable fan speed operation. This unit is also equiped with a POSITIVE and NEGATIVE input. Grounding input 1 will run the fan at MEDIUM speed and applying power to input 2 will run the fan at HIGH speed. 

You can order the module with either a POSITIVE, NEGATIVE, POSITIVE & NEGATIVE , NEGATIVE-NEGATIVE, POSITIVE-POSITIVE or CAN ONLY

POSITIVE style activate when the input is over 3 volts

NEGATIVE style activate when the input is grounded

The extra inputs can be used to trigger the fan speeds for AC operation, manual overide or other applications. Special programing can be done uppon request, If you have a special request please email us before you make a purchase.  Email HERE if you have questions or want special programing 

FUTURE OPTIONS ___________________________________________________________

Vehicle support and fan support will be added to the list as we complete them. If you have something specific that is not on the list feel free to contact us with your details. 

Supporting: 

Mopar Pentastar style PWM fans

GM Camaro based PWM fans

SPAL PWM based fans

Vehicle support:

GM E38 ECUs

Simple hookup:

• ignition SW12 volts
• ground
• CAN +
• CAN -
• PWM FAN Output Signal

Instructions and diagram will be included.

INSTRUCTIONS